Custom CSD-LP High Speed Automatic Blow Molding Machine Suppliers, Company

Product

+86-576-84255555

CSD-LP High Speed Automatic Blow Molding Machine

Minimum cost of material and lowestenergy consumption

CSD-LP High Speed Automatic Blow Molding Machine is for producing PP plastic bottles. With over 40 years of experience and outstanding performance, it has become one of the most famous production lines in world market. This machine can be used to produce 500ml, 600ml, 1L, 1.5L, 2L PET preforms with 28-30mm neck which match most common bottle sizes for water beverage as well as cosmetic and pharmaceutical industries. It is well known for its reliable quality and high productivity which is used in factories all over the world

CSD-LP High Speed Automatic Plastic Bottle Blow Molding Machine is suitable for producing plastic bottles with neck diameters from 28-30mm and mouth diameters from 60-70mm with high quality and short time. The machine is widely used in drink packaging, cosmetics, chemical products packaging and so on.

The machine is designed to lay plastic bottles, including water bottles and medicine bottles. The machine adopts new mold design, good rigidity, high output, compact structure and easy operation, keeping the superior points of CD-L series.

PRODUCT DESCRIPTION


		Screw Air Compressor 17m³/12kg	Air cooled high pressure Air Compressor

Water cooled high pressure Air Compressor	Low pressure Air Compressor	Low Pressure Air Tank 1m³/12.5kg	Mould 10 Cavity

Water Chiller 10m³	Front Air Filter 10m³/40kg	Air Dryer 10m³	Rear Air Filter 10m³/40kg

Servo bottle turning system	Servo cylinder preform sending and separating system	Heating System	Servo Stretching System

ITEN		UNIT	CSD-LP8-2L	CSD-LP10-600mL	CSD-LP10-1.5L	CSD-LP12-1.5L	CSD-LP PP10-600mL	CSD-LP16-500mL	CSD-LP4-5L	CSD-LP4-10L	CSD-LP4-1.5L
Cavity			8	10	10	12	10	16	4	4	10
Volume of Bottle		L	≤2L	≤600mL	≤1.5L	≤1.5L	≤600mL	≤500mL	≤5L	≤10L	≤1.5L
Production capacity		Pcs/h	8000-8500Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, Weight:17gram 7500-8000Pcs/h Based on 1000ML water bottle, Preform Neck 28-30mm, Weight:28gram 5500-6000Pcs/h Based on 2000ML water bottle, Preform Neck 28-30mm, Weight:48gram	10500-11000Pcs/h Based on 600ML waterbottle, Preform Neck 28-30mm, Weight:19gram	10000-10500Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, Weight:17gram 9000-9500Pcs/h Based on 1000ML water bottle, Preform Neck 28-30mm, Weight:28gram 8000-8500Pcs/h Based on 1500ML water bottle, Preform Neck 28-30mm, Weight:37gram	12000-12500Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, Weight:17gram 10000-10500Pcs/h Based on 1000ML water bottle, Preform Neck 28-30mm, Weight:28gram 9000-9500Pcs/h Based on 1500ML water bottle, Preform Neck 28-30mm, Weight:37gram	8000-9000Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, Weight:17gram	15000-15500Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, Weight:17gram	2800-2900Pcs/h Based on 5L water bottle, Preform Neck 45mm, Weight:93gram	2200-2600Pcs/h Based on 5L water bottle, Preform Neck 45mm, Weight:160gram	4000-5000Pcs/h Based on 500ML water bottle, Preform Neck 28-30mm, weight34gram 4000-4500Pcs/h Based on 1500ML water bottle, Preform Neck 28-30mm, Weight:66gram
Suitable Raw Material			PET	PET	PET	PET	PET	PET	PET	PET	PET
Max. Diameter of Bottle		mm	Φ100	Φ80	Φ95	Φ95	Φ80	Φ68	Φ170	Φ210	Φ95
Max.Height of Bottle		mm	320	240	320	320	240	240	340	485	320
Product neck diameter		mm	Φ28-Φ30	Φ28-Φ30	Φ28-Φ30	Φ28-Φ35	Φ28-Φ30	Φ28-Φ30	Φ38-Φ45	Φ40-Φ60	Φ28-Φ30
Space between tie bars		mm	1250×400	1150×300	1200×350	1460×350	1150×300	1420×300	1000×430	1150×500	1200×350
Mould thickness		mm	258	258	258	258	258	258	258	258	258
Opening stroke		mm	118	100	110	110	100	100	190	2230	110
Clamping force		kn	300	300	300	300	300	300	300	300	300
stretching stroke		mm	350	260	350	350	260	260	360	480	350
Air Pressure of Mechanical Action		Mpa	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0	0.8-1.0
Blowing Air Pressure		Mpa	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0	2.6-3.0
Machine Diamension		mm	7685×1600×2000	7575×1600×1900	7600×1600×1900	8500×1600×2000	11200×1600×1900	9780×1600×1900	9500×1800×2000	9200×2200×2600	8500×1600×1900
Power of Preheater		kw	120	120	120	120	240	160	120	150	120
Power of Preheater		A	180	180	180	180	360	240	180	210	180
Motor Power		kw	16	16	16	16	16	16	16	16	16
Motor Power		A	32	32	32	32	32	32	32	32	32
Machine Weight		T	10	10	10	10	10	10	10	10	10
Outer Dimensions of PrelomAuto-Laader		mm	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600	3500×3000×3600
Weight of Preform Auto-Loader		T	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
High Pressure Air Compressor Unit	Power	kw	18.5×8	18.5×4	18.5×8	18.5×8	18.5×4	18.5×4	22×4	22×8	18.5×8
	Pressure	Mpa	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0
	Discharging Capa	m³/min	12	6	12	12	6	6	10	12	12
Low Pressure Air Compressor	Power	kw	22	22	22	22	22	22	22	22	22
	Pressure	Mpa	1.25	1.25	1.25	1.25	1.25	1.25	1.25	1.25	1.25
	Discharging Capa	m³/min	3.0	3.0	3.0	3.0	3.0	3.0	4.0	4.0	3.0
Air tank	Capacity	m³	1	1	0.8×2	0.8×2	1	1	2×2	2×2	0.8×2
Air tank	Pressure	Mpa	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0
Water Chiller	Cooling Capaclty	Kcal/Hr	49800	49800	49800	49800	49800	49800	35200	35200	49800
Water Chiller	Compressor Motor	HP	15	15	15	15	15	15	10	10	15
Air Dryer	Discharging Capa	m³/min	12	6	12	12	6	6	10	10	12
Air Dryer	Pressure	Mpa	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0
After Cooler	Discharging Capa	m³/min	12	6	12	12	6	6	10	10	12
After Cooler	Pressure	Mpa	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0
Odor Removal Filte	Discharging Capa	m³/min	12	6	12	12	6	6	10	10	12
Odor Removal Filte	Pressure	Mpa	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0	3.0

About us

As a famous Custom CSD-LP High Speed Automatic Blow Molding Machine Suppliers and CSD-LP High Speed Automatic Blow Molding Machine company, Changshengda Machinery (Zhejiang) Co., Ltd. was established in 1992, a wholly-owned Australian enterprise with a registered capital of US$5.2 million. The plant covers an area of 72,000 square meters. Now it has successfully cooperated with dozens of domestic well-known brand enterprises. High efficiency and favored by domestic and foreign merchants.

The company adheres to the business ethics of "based on honesty, technology as the core, and quality for survival". Adopting advanced design concepts, scientific high-end configuration, advanced processing equipment, and precision manufacturing of Changshengda series products, it can fully meet the different needs of high-end customers at home and abroad.create a high-quality brand and cast a first-class image, we continue to innovate CSD-LP High Speed Automatic Blow Molding Machine and implement the service promise of "turnkey project".

We have set up many after-sales service agencies at home and abroad to provide new and old customers with high cost performance. Products and thorough after-sales service.

Our Honour&Qualification

News

What are the characteristics of a vertical injection molding machine

Injection molding machine is also known as injection molding machine or injection machine. It is the main molding equipment for making thermoplastic or thermosetting plastics into ...
What are the effects of each part of the injection molding machine

(1) Injection system Effect of injection system: Injection system is one of the most important components of Ningbo injection molding machine. Generally, there are three main metho...
How does plastic injection molding work

In short, injection molding machine can be boiled down to a few simple steps:1. Melting plastic materials2. Inject the material into the metal mold3. Let the material cool4. Take o...
How to do Blow Molding

It draws on the long-established glass container blowing process. Blow molding originated in the 1930s. It was not until 1979 that blow molding entered the stage of widespread appl...
How to solve the problem when the blow molding machine is working

The blow molding machine cannot take out the mold after blowing. First of all, open the mold, open and close the mold manually, if it is normal, and work it in the empty working co...
What is the cooling technology of the blow mold factory

Blow moulding machine is a machine that achieves cooling effect through steam compression or absorption cycle. These liquids can flow through heat exchangers to cool the air or equ...