You may be very familiar with the blow molding machine, which is mainly used for blowing bottles. The blow molding machine is mainly used to blow plastic particles or softened liquids through the specified process methods to become what people need. Bottles, compared with other raw materials, plastic hollow containers are not only light and cheap, but also very safe. They can be seen everywhere in our lives, especially the various beverage bottles used at home. It is made of plastic as raw material, which brings more convenience to people, but what preparations should people do before using the blow molding machine?

CSD-AX1-M-2.5L Automatic Blow Molding Machine（Down Blow）


Before using the blow molding machine, you should carefully check whether the moving parts are firm, and you also need to carefully check whether the screws are loose. If there is, it should be tightened in time to ensure safety and stability during use. For places with very strong impact force, it is necessary to check whether the belt drive part is normal, whether there is serious wear and tear, which needs to be replaced and dealt with, and it is also necessary to add lubricating oil to each part to ensure a longer service life of the mechanical equipment time.

Repairing the blow molding machine in accordance with the prescribed order can not only ensure the normal production of the product, but also prolong the service time of the machine and equipment. Therefore, in the maintenance of the blow molding machine, the following maintenance rules should be correctly implemented to improve product quality and productivity. When the blow molding machine fails, it must be repaired as soon as possible. If it can be repaired during power outage or product replacement operation, it will help to reduce downtime and not delay machine production.

For the parts that affect the blowing quality of the blow molding machine, it needs to be replaced or repaired every six months. If there are parts that do not affect the quality of blowing, they can be used for a longer time, which can reduce maintenance costs. If the bottle blowing machine needs to be repaired in a large area, it is appropriate to repair it together when the glass melting furnace is repaired, so as to avoid the shutdown of the bottle blowing machine during the production process.